Technology Sponsor
AMCS is the leading supplier of integrated software and vehicle technology for the waste, recycling and material resources industries. We help over 2450 customers to reduce their operating costs, increase asset utilization, optimize margins and improve customer service. Our enterprise software and SaaS solutions deliver digital innovation to the emerging circular economy around the world.
Digital Ways to a Cleaner World
Internet Sponsor
LEADER IN MRF DESIGN
Challenges – Solutions - Innovations
For over 30 years, Machinex uses innovative recycling solutions to design and produce custom-made sorting and recycling technology for facilities all around the world. As industry leader in the design of profitable and reliable material recovery facilities, we offer a full range of waste recycling equipment in addition to our state-of-the-art sorting systems to meet the needs of today and tomorrow:
• Single-Stream Sorting
• Construction and Demolition Debris
• Commercial and Industrial Waste
• Municipal Solid Waste
• Waste-to-Energy front-end processing
Custom-Built Solutions
Whatever the configuration of your recycling facility and your type of operation, you need equipment that has been designed to meet your space requirements, output objectives, and budget. At Machinex, our engineers do not just design sorting systems for you — they design them with you. Today, material recycling facilities must produce very pure materials through efficient separation of contaminants. Systems designed by Machinex take this into consideration and accommodate the requests of our customer and the market.
Experience Results
Through the years and more than 250 flawless installations later, we have been renowned in the industry for our INNOVATIVE DESIGN, our CREATIVITY TO FIND SOLUTIONS, our PERSONALIZED CUSTOMER APPROACH and our BEST PRICE/QUALITY RATIO.
Keynote Session Sponsor
Van Dyk Baler Corporation is the exclusive North American distributor of Bollegraaf Recycling Machinery.
Van Dyk Baler Corporation is the sales and service organization for all of Bollegraaf's products consisting of balers, sorting systems, shredders, conveyors, screens, packing presses, roll cutters and more.
These turnkey-manufactured recycling products are all made in the Netherlands, where Bollegraaf Recycling Machinery is located.
Session Sponsor
BHS is a worldwide leader in the innovative design, engineering, manufacturing and installation of sorting systems and components for the solid waste, recycling, waste-to-energy, and construction and demolition industries.
Wholly-owned subsidiaries include Nihot, NRT and Zero Waste Energy. BHS is also the home of Max-AI® technology, a breakthrough artificial intelligence that identifies materials, makes intelligent decisions and directs equipment such as robotic sorters.
Vision. Innovation. Collaboration
Clients around the globe choose BHS because of its experience, dedication to cutting-edge technology, quality construction and durability, and unmatched customer service. BHS has built some of the largest and most durable MRFs in the world – and they are achieving the highest throughput, recovery, and purity rates in the industry.
Fast & Furious Stage
The equipment CP manufactures is durable and drives results– throughput with minimal downtime. CP has exceeded our expectations with the overall design and the system performance”.
The CP Group is your single resource for all your recycling equipment needs. We will provide you with the most innovative solutions for your recycling operation. From single stream recycling to waste to energy, optical sorters to balers, the CP Group is your one-stop-shop industry-proven company to turn to for the most technologically advanced sort systems and equipment. So if you are looking for a partner who can provide state-of-the-art, turn-key solutions for your material recovery facility, trust the global leader.
When you go with one, you GET THE POWER of all 5 companies of the CP Group: CP Manufacturing, Krause Manufacturing, MSS Optical Sorters, IPS Balers and Advanced MRF.
Your Single-Resource for Material Recovery Facilities:
The 5 industry-proven companies of the CP Group have joined forces over the past decade. With 150 years of combined company experience, over 75 innovative patents, the CP Group and its 725 experienced employees worldwide, provide solutions to any waste or recycling separation need. Trust the Global leader.
Thursday Lunch Sponsor
International Baler Corporation has been manufacturing balers for over 55 years. We pride our selves with providing our customers with a quality product that will supply years of continuous service.
We offer a full range of balers, from entry level Vertical Balers to full Auto-Tie and Two-Ram systems. This allows us to place the correct equipment for each individual application, based on each customer’s needs.
IBC stands behind it’s equipment with quality customer service too. We have an in-house Service Department and Parts Department as well as a network of service companies to help you maintain you equipment. This “Service after the Sale” is there to ensure that your baler will operate efficiently and serve your needs for years to come.
Session Sponsor
STADLER is a world-leader in designing, manufacturing and installing Material Recycling Facilities (MRFs). Sorting, screening and complete Material Recovery Solutions for MSW, co-mingled & single-stream, paper & OCC, lightweight packaging, plastic bottles, C&I, C&D, RDF. STADLER has installed more than 300 complete turn-key recycling plants and over 1000 ballistic separators worldwide. STADLER’s Ballistic Separator is the most efficient and versatile waste separation screen for paper (2D), containers (3D), and fines in the industry, with extremely low maintenance and operating costs. STADLER’s high quality engineering and manufacturing is based in Germany. STADLER America is located in Colfax, NC, guaranteeing reliable spare-parts supply and after-sales service.
Elevator Graphics Sponsor
Vecoplan is a worldwide leader in shredding and recycling technology for plastics, wood, paper, e-scrap, tires, C&D waste, MSW, Waste to Energy, and Waste Derived Fuel. Vecoplan was founded in 1969 in Bad Marienberg, Germany as a manufacturer of high quality wood chippers. In the early 1980’s, Vecoplan’s focus turned to the design and manufacture of innovative machinery for recycling a comprehensive range of materials.
Escalator Graphics Sponsor
Lindner Recyclingtech, based in Spittal, Austria has been in the size reduction business for over 75 years. Our focus is on shredding equipment and technology for the plastic, paper, municipal waste, wood and other defined customer applications. Our customizable, high precision industrial shredders cover a wide range of materials with capacities from 1000 lbs/hour to systems producing 100,000 lbs per hour. Lindner also offers large dual shaft mobile shredders for landfills, C&D sites, scrap processing and wood applications. With over 75 years’ experience in size reduction technology, we invite you to contact us to find out how we could be of assistance for your business or visit our North Carolina based headquarters for equipment demonstrations.
Window Graphics Sponsor
You name it – we sort it! TOMRA Sorting Recycling has over 6,000 systems installed in more than 100 countries worldwide. We offer a broad range of different sorting applications to separate a large variety of valuable fractions including plastics, metals and paper from waste, to name a few. Our sorting systems recover clean material fractions, delivering significantly higher yields and increased value from the input material.
Our latest innovation, the new generation AUTOSORT®, integrates our most advanced SHARP EYE and FLYING BEAM technologies to deliver unrivaled accuracy of the most complex sorting tasks at high throughput rates. Adding the available Near Infrared (NIR) DEEP LAISER technology allows AUTOSORT to separate glass, black and other materials. The new AUTOSORT® SPEEDAIR incorporates speed-controlled, fan driven air inlets that generate a constant air stream over the conveyor belt to prevent light material, such as plastic film or paper, from moving off of the conveyor at belt speeds reaching 19.7 ft/sec (6 m/sec).
Capable of simultaneously sorting material into four different fractions or streams, TOMRA’s AUTOSORT® CYBOT is the first robot on the market to combine four technologies at once: NIR, Visible Light (VIS) spectroscopy, DEEP LAISER, and, if required, induction for ferrous and non-ferrous metals recovery.
Video Display Sponsor
Sennebogen is a family-owned, German material handling equipment manufacturing company. Sennebogen LLC was formed in 2000, headquartered in Stanley, NC, and supplies purpose-built material handlers for: scrap, waste and recycling, demolition, ports, tree care, logging, and other manufacturing and industrial yards.
Floor Graphics Sponsor
SSI Shredding Systems custom engineers, manufactures and services industry-proven size and volume reduction solutions. With installations in 47 countries, SSI utilizes exclusive, patented features with low-speed, high-torque technologies to produce quality one-, two-, and four-shaft industrial shredders, primary waste reducers and pre-load/transfer station compactors.
Consider the ‘SSI Advantage’:
• Collaboration with customers to generate a broad range of innovative solutions for the most demanding and difficult waste reduction, recycling and resource recovery tasks.
• In-house engineering and design services to tailor systems to specific business needs.
• State-of-the-art production facility to ensure timely delivery of cost-effective, quality-assured products.
• On-site demonstration testing to permit first-hand solution validation.
• Comprehensive parts and service to support long-term customer success.
Since 1980, SSI's innovation, improvement, and engineering has created an evolution of the most versatile shredders in the market today. SSI Shredding Systems continues to extend the limits of size reduction by asking one recurring question: What Needs Shredding?™
